resoldered radiator-finally done

[scott thomas]

Well, it turned out that I didn't do a perfect job yesterday. The
tabs that fold over the tanks got in the way, so I didn't do much
cleaning before running the torch underneath them. Well, turns out, I
didn't make very good solder joints there. They weren't leaking, but
I could see "moisture", kind of like when you have oil residue on
metal. Anyhow, I brazed the tabs up, cleaned and soldered underneath
and redid the whole radiator for good measure.

It helps to have a wire wheel and brush to scrape the surfaces while
the solder is flowing.

The Official Dream Theater Site - http://www.dreamtheater.net/
____________________________________________________________
Get your own Free Web Email Service with POP access at http://www.zzn.com