removing 4kq front axle

[Ragnampiza at aol.com]

In a message dated 10/15/02 1:07:32 PM, porter_dog at hotmail.com writes:

<< When I did my '86 I undid the nuts which hold the ball joint in place;
mark it first to preserve your alignment.  The 'bolts' are really a plate,
you'll need to get the control arm in the right position to get it out (and
back in ;) )>>

there is no need to remove left control arm .....the axle can be worked out
by shifting front wheel back and forth.....the right side will need the 2 CA
to sub bolts removed
to work out the axle.....better leave those BJ 's alone to preserve
alignment..ML