adjustable wastegate cap

[Ron Wainwright]

  Mark,

  One question,
 after looking at a few write ups on adjusting the
waste gate cap each write up states that there should
be an allen bolt to keep the perch on the cap tight,
 but the extra waste gate cap I got doesn't have an
allen bolt it just kind a has the perch fixed to the
cap and when the spring perch is forced off there's a
threaded rod present kind a looks like the oil plug I
have in the car has a little section of bolt that
isn't threaded thats skinnier than the threaded part
at the bottom.
Part # on the cap is 035 145 725 A and it saies
Austria before the #'s,
 all so the spring from the extra cap I got didn't
come with a stock spring it has 2 light green marks on
the coils what kind a spring is this someone said it
may be a euro spring it feels prity stiff,
 how can I tell?
Thanks
Ron



--- Marc Swanson <mswanson at sonitrol.net> wrote:
> >   Anyone know of a writeup or site(other than SJM)
> on
> > making an adjustable wastegate cap for my 90
> 200tqa?
>
> Nate put this up a while back:
>
> http://www.mswanson.com/~nstuart/wastegate.html
>
>
> --
> ----------------------------------
> Marc Swanson, Software Engineer
> Sonitrol Communications Corp.
> Hartford, CT
>
> Email: mswanson at sonitrol.net
> Phone: (860) 616-7036
> Pager: (860) 948-6713
>  Cell: (603) 512-1267
>   Fax: (860) 616-7589
> ----------------------------------
>


__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/