starter removal4kq :any top bolt BtDt?

[Doug Hill]

Well the easiset way is to use a lift because when i tried using a floor
jack I could not get enough leverage on the bolts (thank god one of my
friends who owns his own garage let me use his, cost me a 12 pack) I just
used  my 10" ext on my ratchet and use an elbow adapter(sorry i can't
remember the proper term) then my deep well 3/4 and it came off. I had to
use so much wd-40 to get the bolts to unfreeze I think my tools are greased
for life.
HTH
Doug Hill
87 4kcs quattro

>From: Tu2Tweng at aol.com
>To: quattro at audifans.com
>Subject: starter removal4kq :any top bolt BtDt?
>Date: Wed, 4 Sep 2002 16:54:47 EDT
>
>I know this has probably been covered ....but I couldn't find an answer to
>my
>liking in the archives.
>
>How in the world do you get the top bolt loose short of removing the lower
>pipe?
>I got a wrench down on it from the top...after removing the intake boot,
>but
>it is very tight in there, and I can't seem to get leverage enough to break
>it loose....
>there is very little room to swing a wrench.
>
>and if I have to remove the lower pipe ....how is this done without
>removing
>the subframe?


bow

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx