Master or Slave Cylinder?

[Kneale Brownson]

--
If it's the clutch MC, you usually can "pump it up" and make it work for a
while by manually pulling up and pushing down.

You did check that the brake fluid reservoir is above the minimum level????

At 04:05 PM 09/19/2002 +0000, radek at istar.ca wrote:


>Hello listers.
>
>My clutch pedal is not coming back.  When I press it down, I can still
>shift but it only
>comes back about
>1/4 of the way and I have to pull it up with my foot.  Soon it will fail
>completely, I
>know, just hope I can
>make it home from work today.
>Is it the master cylinder that is failing, or the slave cylinder, or
>perhaps both, or
>still something else.
>All suggestions will be appreciated.  Thanks.
>
>Radek
>91 V8Q 5-sp. (needs differential seal)
>88 90 Q (needs master or slave cylinder, or both!)
--