clutch pedal 4K Quattro adjustment

[Suffolk GameServer LAN]

Reclassifying for the archives.

Remove the panel that covers the pedals under the dash (on most cars they
seem to be gone anyway).  Under the dash, you'll see a long arm that
connects the clutch pedal to the clutch master cylinder (mounted on the
firewall).  On the end of the arm that attaches to the pedal, there is a
clevis or "fork".  To adjust the pedal, begin by backing off the nut that is
butted against the clevis. Next, turn the arm counter clockwise (I think)
until the pedal is at the correct height.  If you go to far, the clutch
pedal will stop before it hits the floor.  I usually wind the arm out until
I reach this point, and then I wind it back slightly until the pedal hits
the floor just before it stops.  When you're done, tighten the nut against
the clevis to keep everything secure.