Starter

[Greg Galinsky]

--
--
[ Picked text/plain from multipart/alternative ]
The easiest way that I have found to remove the upper starter bolt is with a
19mm swivel socket; attached to a 18" long 1/2" drive extension with a
wobble" end.  Using a 1/2" drive rachet; the bolt can easily be loosened;
after removing the right front tire. Takes longer to type this than to do it
  The bolt head can be seen looking under the wheelwell.

Greg Galinsky

-------Original Message-------

From: Suffolk GameServer LAN
Date: Tuesday, April 08, 2003 03:53:24 AM
To: quattro at audifans.com
Subject: RE: Starter

Not exact 200 vs 80/90 but the idea is there,
HTH - Scott in BOSTON
http://www.avacationhomerental.com/MPTSStarterReplacement.htm


Changing (or trying to change) the start on my 88 80q. I've got the lower
>bolt off. Trying to locate the upper bolt. I assume it's held in place
>by two bolts although I've heard rumors on the list that it's held in
>place by just the one lower bolt.
>
>Any step-by-step BTDT or words of wisdom?
.
--
[ IMSTP.gif of type image/gif deleted ]
--