I5 fuel rail for efi ideas

[scott thomas]

Thanks, Jim. This is for an MC2 200q. As far as the intake manifold
and throttle body, it's really not an option, unfortunately, to swap
kh pieces. I want to keep the car as stock as possible, as well as
wanting to keep cost and labor down.

I recently did the off the engine head job and I don't want to pull
the manifold off again. It's holding pretty tight.

As far as the rail and brass fittings, that answers my question
pretty well. I'll just find someone to weld up the brass to the
steel. Hopefully, won't be too expensive.

The Official Dream Theater Site - http://www.dreamtheater.net/
___________________________________________________________
Get your own Web-based E-mail Service at http://www.zzn.com