5000q&200q cv boots the same?

[cobram at juno.com]

443498201B comes with a BOLT. (200TQ)

443498203A comes with the NUT and circlip. (5000TQ)

The boot should have the info on it.  Lobro # 2X925-5 for example (V8Q
boot) translates to diameter of 92.5mm on one end and 25mm on the other.
I THINK that's how it works, First and Last = 25, Middle = 92.5,  there
was a site out there in the either that explained this.  If I'm off here
someone please correct me.

Easiest thing would be to have TPC pull one of each off the shelf and
compare the boot numbers.  IF they have two on the shelf, most 4N net
parts suppliers seem to do little more than drop ship from WorldPac these
days.

BCNU,
http://www.geocities.com/cobramsri/


 "scott thomas" <scott at dreamtheater.zzn.com> writes:

> I'm going to be rebooting one of the axles on my 200q soon and was
> wondering if the outer cv joint boot is the same as on the 5000tq?
>
> Rod at TPC and I were trying to figure it out because the 5000 type
> uses the large nut and the 200 I have uses the center bolt. I put

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!