Welding of manifolds...

[JShadzi at aol.com]

Gerard, I'd say your last post summed it up quite well, drill each end, grind out the crack slightly to expose new metal and open up the crack for weld filler, heat up the manifold to about 500F and weld away.

Javad

>I found this during my searching on google.com for some silver
>soldering/brazing information:
>
>   http://www.muggyweld.com/silvercast.html
>
>Not so sure how this would hold up on stressed items, but seemed like an
>easy thing to do. Anyone used silver solder to repair a manifold?
>
>G.
>