83 urq green O2 sensor wire?

[Louis-Alain RICHARD]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
Hi All,

I'm over here at Louis-Alain's troubleshooting my stumble under high boost.
I just wired in a relay for the fuel pump. It was reading 11.9V before. Now
it's 13.8V. Of course, now I have a louder fuel pump.

Anyways, a PO had stripped away some wire sheathing on the green O2 sensor
wire (computer side of the connector). There appears to be an inner and
outer wire, yet the connector is a single spade.

What is the double wire for? The outer one is cut right at the connector and
will be impossible to repair. The inner one is fine.

Can I just close up the sheath and ignore the outer wire?

Help!

Bentley isn't very helpful. It shows a thicker looking wire from the sensor
connector to terminal 6 on the OXS control unit..

Cheers,
Brady Moffatt
83 UrQ with some small issues
--