still no spark

[Jim Green]

--- luke <maytagasm at sympatico.ca> wrote:
> well should i spin it until the pin is directly
> under the sensor?
> then see where the marks are?

I would, my bet is that the pin is installed right,
but the window that you look through that allows you
to see the TDC mark is different on your tranny than
it was on the 5ktq.  I know that's an issue.

If so, then you need to do the rod thing and get that
piston as close to TDC as possible, see if the pin is
where it should be, then line up the cam and Dist.

When you put in the KH originally, did you go through
all this, or was everything lined up already and you
just started it up?

Jim

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com