Valvoline MaxLife woes (long)

[james accordino]

Chrysler made a very effective separator.  Used by
alot of drag racers venting big motors.  Usually
mounted in the valve cover grommet.  Metal canister
about the size of a small teacup.  Stuffed with
stainless? mesh.  Almost free at a picker.  Last
forever and can be cleaned.  Look at some 70's V8.

Jim Accordino

--- Jim Green <jeg1976 at yahoo.com> wrote:
>
> --- TM <t44tq at mindspring.com> wrote:
> > Brett-
> > One note though- with an engine running a lot of
> > boost, you
> > will get some serious flow of stuff from the PCV
> > system.
> >
> > Jim- what kind of oil/air separator are you using?
> > Eventually,
> > I plan on getting a proper catch can and redoing
> the
> > PCV system
> > so that I don't need anything but simple straight
> > hoses for it
> > all. :-)
>
> It's a Porsche 924 Turbo unit 931.107.221.01
>
> Pics at
>
http://www.geocities.com/jeg1976/conversion_home3.html
>
> It seems to work OK, I need to put the drain in a
> better place below the oil line, otherwise, this is
> the best OEM piece I could find.
>
> =====
> Jim Green
> '89 90tq 034EFI Stage II
> http://www.geocities.com/jeg1976/car_home.html
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com