H2O injection: what nozzle?

[Jim Green]

--- Gerard <gerard at poboxes.com> wrote:
> I've been thinking about water injection for the MC
> engine for a while. Alot
> of systems out there are expensive as a complete
> kit, so I'm going to look
> for generic little parts here and there with the
> intention of having a clean
> installation if I do decide to add it o the stuff
> going onto the vehicle.

You should be able to make a decent system for under
$200

Shurflo 100 psi pump $65
Accumulator $35
Napa pressure switch $15?
Solenoid from grainger or mcmaster $40
Nozzle $20

> I was curious as to what people would think of using
> a NOS dry system fogger
> nozzle and various jets. They're about $15 new for a
> nozzle excluding jet. I
> can probably find old nozzles for a few dollars,
> probably. It'd make a clean
> install.

They may work OK at 100 psi, but I'd recommend the
Aquamist nozzles.  They work really well, and are
about the same price.


> Just wanted to find out if anyone has such a thing
> going and whether it'll
> work. The spray has to turn 90 degrees into the air
> stream, but I guess it
> will do so anyway. :)

Look at the DSM water injection group in yahoo groups.
 Tons of info there.  I love the stuff, it really is
like adding some high octane gas, it just works.  It
works really well on cars with mediocre intercoolers.


=====
Jim Green
'89 90tq 034EFI Stage II
http://www.geocities.com/jeg1976/car_home.html

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com