(no subject)

[David]

The measurements on the clutch kit are 9" (228mm), 13/16t input shaft & 24 tooth spline. Let me kow your thoughts...

Dave


> From: "Stephen Santoliquido" <santoli9 at cox.net>
> Date: 2003/08/11 Mon PM 01:35:27 EDT
> To: "'David'" <duandcc_forums at cox.net>,
> 	<quattro at audifans.com>
> Subject: RE: RE: (no subject)
>
> I can't locate that one. But FP shows some of the clutch disks/plates as
> NLA.
> GAP says 035141117E is for QUANTUM(2.2LTR)83-84 4000 5+5/QTRO,COUPE 80-84
> but doesn't list 117C.
> IMPEX shows it as a pressure plate, but gives no application info. IMPEX
> shows the 035 141 117 Q as fitting 85-87 CGT, They also have the 035 141 117
> QX (the correct part # per FA), but give no application data. Go figure.
> I'd say it's probably a long shot.
> OTOH, if you can get measurements, I have mine out of the car. We could make
> some comparisons.
> Steve
> 87.5 CGT (In pieces)
>
> -----Original Message-----
> From: David [mailto:duandcc_forums at cox.net]
> Sent: Monday, August 11, 2003 12:23 PM
> To: santoli9 at cox.net; quattro at audifans.com
> Subject: Re: RE: (no subject)
>
>
> OK, He's not 100% sure it's the same. You say the pressure plate is 035 141
> 117 QX but the one in his kit is 035 141 117 C. The throw out bearing
> matches. Thoughts?
>
> Dave
>
> >
> > From: "Stephen Santoliquido" <santoli9 at cox.net>
> > Date: 2003/08/11 Mon AM 11:47:45 EDT
> > To: "'David'" <duandcc_forums at cox.net>,
> > 	<quattro at audifans.com>
> > Subject: RE: (no subject)
> >
> > Can't say abou all 5 cyl. But the correct part # for CGT w/NG engine is
> 035
> > 141 117 QX for pressure Plate, 088 141 165 B for throw-out bearing, clutch
> > disc is UA on FP. Blau shows the sachs set fitting all 84-87 4kq, and
> 85-87
> > CGT. Were's the deal? I need a set for mine. I'm looking at $190 from Blau
> > for the set. I haven't called TPC yet.
> > Steve
> >
> > -----Original Message-----
> > From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
> > Behalf Of David
> > Sent: Monday, August 11, 2003 10:41 AM
> > To: quattro at audifans.com
> > Subject: (no subject)
> >
> >
> > Hey,
> >
> > Does the 87.5 CGT (with NG engine) use a different clutch than a regular
> 87
> > CGT? Reason? I found a GREAT deal on Original Equipment Sachs Germany
> Clutch
> > Kits. They claim that this kit fits all 8/1984 to 1990 Audi 5 cylinder
> motor
> > vehicles. Did they all really use the same clutch?
> >
> >
> > Dave
> > 2002 Jetta 1.8T (hers)
> > 1993 RX-7 R1 (weekend play toy, soon to be for sale)
> > 1987 CGT Special Build 2.3
> > in SE Virginia
> >
> >
> >
> >
>
>
>
>