Big Arch Flaring 5KTQ

[Haydn Taylor]

[ Converted text/html to text/plain ]
Haydn Taylor Morning Zsolt, Thanks for the info, that was pretty much my
thinking too. I am half tempted to build URQ style arches to be honest, but
thats quite a big effort. Haydn >From: Zsolt >To: Haydn Taylor >CC:
quattro at audifans.com >Subject: Re: Big Arch Flaring 5KTQ >Date: Wed, 13 Aug
2003 13:30:02 -0600 > >Haydn, >AFAIK there is no wheel arch repair pieces
available for the 20v 200 >which is I think your best bet would be to use. You
may just have to >see if there is any other car which has a similar size/shape
wheel >arch, or get used fenders from a 20v car. >Good luck, and keep us
posted. > Zsolt > >Haydn Taylor wrote: > >>[ Converted text/html to text/plain
] >>Haydn Taylor Hi all, I have half heartedly been looking for a while >>now
for >>some way to flare the arches on my 86 5KTQ. I am after something >>like
the >>Taladega setup. When I lived in the UK I was able to buy >>aftermarket
wheel >>arch repair sections for all sorts of cars. these were steel parts
>>that are >>intended to replace rust or accident damage to arches. Basically
>>you would cut >>out the old arch and about an inch or so above it , then
weld in >>the new >>arches. Is there anything like this available in the US,
>>alternatively is >>there any aftermarket plastic or glassfibre wheel arches
that I >>could use. My >>intention is to allow me to run BIG rims and tyres -
18x8 etc >>thanks Haydn
>>_________________________________________________________________ >>MSN 8
with >>e-mail virus protection service: 2 months FREE*
>>http://join.msn.com/?page=features/virus >> >> >> >
_________________________________________________________________ MSN 8 with
e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/virus