Help on '89 200Q Knee Bar and 2nd ?

[Larry C. Leung]

Thanks, guys. I'll look there. Didn't think of the end cover.

LL - NY


On Thu, 28 Aug 2003 15:00:55 -0400 Kneale Brownson
<knotnook at traverse.com> writes:
> Actually, I think it's five screws.  At least it is on my '91.  The
> one by
> the pedals, the one on the left at the base of the dashboard end
> cover, the
> one under the steering column and the two that are hidden by the end
> cover
> for the dash.  The first two are a hex-head screw (I use a
> nutdriver, but a
> socket will do too) that's about a 7 or 8 mm.  The rest are allen
> types
> that I think are 4 mm.
>
> At 12:23 PM 08/28/2003 -0700, Larry C. Leung wrote:
> >Hello List:
> >
> >Okay, looking for experience on removing the driver's side knee
> bar
> >under the steering column to access the auxiliary fuse panel. The
> >Bentley's mentions 3 screws, I found two. The obvious one right
> >above the pedal cluster, the somewhat hidden one in the upper left
> >corner near the dash, and, and....
> >
> >Any hints here? I tried removing the lower steering column cover,
> >which didn't want to budge, but I didn't see any screws under
> there
> >anyway (there's a little hex screw, but it didn't seem to be
> attached
> >to the knee bar.)
> >
> >Second question. Is the reverse light switch most easily reached
> from
> >under the car, or under the hood?
> >
> >TIA, and happy Labor Day....
> >
> >LL - NY
>
>
>