tachometer signal revisted, LONG
Alan Pritchard
apritchard at seaeye.com
Tue Dec 2 06:35:34 EST 2003
I think that's one of the major differences between the turbo cars and NA,
the mac ecu's use a flywheel sensor for more accurate timing, while the NA
cars stick with timing info form the dizzy, which due to cam belt slop, and
even torsion on the camshaft produce a less accurate engine position
reference.
-----Original Message-----
From: Phil Payne [mailto:quattro at isham-research.com]
Sent: 02 December 2003 11:30
To: quattro at audifans.com
Subject: Re: tachometer signal revisted, LONG
> Audi says the tachs are the same. Javad (and others) say that they need a
> signal based on number of ignition events per engine cycle.
I don't know what car you're thinking of, but on the MAC-01 and MAC-12D
ur-quattros and on the
MAC-14 MC engines, the rpm signal comes from a flywheel peg via sender G28
and is fed to the
ECU. The ECU provides an output signal on Pin 7 (lilac wire) that goes to
the dashboard, the
oil pressure warning controller, and the idle stabilisation unit. One pulse
per revolution.
I think anyone who isn't familiar with the system at this level oughtn't to
mess with it.
--
Phil Payne
http://www.isham-research.com
+44 7785 302 803
_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro
More information about the quattro
mailing list