Custom bent exhaust system

[JShadzi at aol.com]

Realistically, 2.5" mandrel bent tubing is probably good to about 400hp, the Stebrro system is not mandrel bent, and isn't a very high quality system IMO, I'd have a local shop build something up.  If they don't have a pull through mandrel bender, then the 3" crush bends will flow very well for over 400hp.

Javad

>Hey All,
>     I'm up to get a custom exhaust system from the cat back. I want to 
>either just use the cat as a silencer or install a Leistritz S/S rear muffler off 
>my Jetta VR6 2.5". Now, What are the gains for going to 3" over going to 2.5" 
>I'm have heard alot of things as the Stebro is a 3" for my car. Some people 
>recommend 2.5" cat back. I've heard a worked 2.22 turbo with no cat and just a 
>muffler and it's wonderful. This car has the basic mods. done to it..
>
>200 TQ 10V K26
>
>ECU Chip
>WG Spring
>Swissed box and K&N with inner fender mod
>
>
>
>
>
>
>
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro
>