1994 Cabriolet front bumper valance source?
Kent McLean
kentmclean at mindspring.com
Thu Dec 18 15:25:49 EST 2003
Zaf <zpavelic at comcast.net> wrote:
> Some of you might remember my posts about my attempt to help
> maintain this girl's 94 Cabriolet. As a single mother she really
should
> own a 4K or a 5K.
As a single mom, should probably shouldn't own an Audi.
Especially if she can't avoid a parked motorcycle.
> An impromptu frontal impact test with a standing motorcycle resulted
in the
> permanent deformation of the frontal valance and a pinhole in the oil
pan.
I'd tell her to live with the deformed valance, to remind
her to be more careful when she parks -- especially
around motorcycles. She holed her oil pan, she probably
damaged the bike, too; I hope she left a note.
JB Weld should work on the oil pan. Just make sure
you totally clean up any oil around the hole -- JB Weld
doesn't stick well to oil. I'd take off the oil pan, maybe
pound it back into shape if it is real bad (if it is steel; I'm
not sure I pound on alloy.) , clean the bejeezes out of
the area, then fill/cover the hole with JB Weld. Or take
it to a welder and have them fill the hole. Either way
should work.
Kent
More information about the quattro
mailing list