SS brake line supplier

[Richard Hoffman]

Go to www.amstreetrod.com and you can get a whole set of lines for quite
cheap - I paid $94.00 for a set of 4.

For a complete set, you'll need:
2 units Male -3AN to 10x1.0mm adaptor P/N 592032 (2 fittings per package)
4 units Female -3AN to 10x1.0mm adaptor P/N 989534 (1 fitting per package)
2 10" lines, -3AN female swivel fittings, -3AN hose:  P/N 63010110 (rear)
2 14" lines, -3AN female swivel fittings, -3AN hose:  P/N 63010114 (front)

The hoses are a little bit cheaper if you buy them from Jegs, but you have
to pay for Jeg's "handling charge" which negates the advantage of the
cheaper parts. Also, I've never had anything but good service from Tim at
American Street Rod.

I'd recommend also getting an M10x1.0mm tap and die to ensure all the
threads are in excellent condition before installing the fittings.  The
fittings have thick plating and are a tight fit unless you clean them up
with the tap/die.  Often there is a bit of gunk/rust in the calipers' hose
receptacle (for lack of a better word) as well

HTH!
Richard


----- Original Message ----- 
From: <DGraber460 at aol.com>
To: <quattro at audifans.com>; <urq at audifans.com>
Sent: Sunday, December 21, 2003 12:49 PM
Subject: SS brake line supplier


> A friend needs to know of possible sources for SS brake lines for an URQ.
I
> think he has G60's. One of the fittings broke pulling into a parking lot
> leaving him with NO brakes. If it had happened a few minutes/hours earlier
who know
> what might have been his fate. Scary stuff!
>
> Dennis
> Denver
> "Good judgment is a result of experience, which is often the result of
poor
> judgment"
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>