Spark plug wires question

[Bob DAmato]

I inquired a little while ago for the 200 20v motor wires and this is 
the response  i got the following email. note these numbers and prices 
are for 3b.

Ps, I did order them and get them in. I was extremely impressed with the 
quality. They fit like a champ and work great.  No reason at all to go 
with bosch!! ;-)

Bob



The prices are:
       
Electrosports-70 7mm cable, part number    5713    - $159.80
Electrosports-80 8mm cable, part number    5013    - $163.05
KV85 8.5mm cable, part number    5513    - $223.99
KV85 CN series 8.5mm cable, part number    5313    - $235.19
R-100 10mm cable, part number    5913    - $261.39

For shipping costs, see the bottom of this e-mail.

The 7mm (black) or 8mm (blue) cables should be fine for a standard 
unmodified engine, they have very similar constructions. The KV85 
Competition 8.5mm (red) cable is intended for raced or modified engines 
- it is not just a bigger diameter cable, the KV85 8.5mm cable is a 
different product that has more capabilities for performance, 
suppression and heat resistance and can be used on ANY engine with no 
problems. The R-100 Racing 10mm (red) cable is the same basic cable as 
the 8.5mm and provides the same performance and suppression, but has a 
thicker jacket for more extreme temperature protection and insulation.

The "CN series" cables (which are not available for some applications) 
are special versions of our 8.5mm and 10mm cables that provide extra RFI 
suppression and are mainly intended for ham radio, CB radio and similar 
installations with unusual noise problems; the CN series cables do not 
help with most other applications and take longer to ship because CN 
series sets are always made to order - they are never in stock.

We do not keep track of resale prices by our dealers so it is quite 
possible that you may find these wires discounted somewhere, we are a 
manufacturer and do not get into price wars with our own dealers so we 
generally cannot match their discounted prices. If I know where you are 
I may be able to suggest a local dealer.

ORDERING INFORMATION:

If you want to order by credit card we need;

name and shipping address
credit card's billing address (if different to your shipping address)
credit card's number and expiration date
credit card's customer number (for Commercial Cards only)
a telephone number, e-mail address or somewhere we can leave a message

We accept American Express, Discover, Mastercard or Visa. We do not have 
a secure server, so if you do not feel confident e-mailing this 
information you should fax it to me at 248-669-2994 (which is a direct 
fax number to me) or telephone it to 248-669-6688 (8AM to 5PM USA 
Eastern time is best, but earlier or later will often work). Please 
contact me if you have any questions. If you do not want to e-mail your 
credit card number send the number and expiration date as a small .jpg 
or .gif image attachment to your e-mail, which is much more secure, or 
simply attach your order to your e-mail as a text file.

Other payment methods;

For shipments to most (but not all) US ZIP codes we provide a UPS COD 
service for $6.00 extra (you have to pay by money order at your end, 
there are some exceptions to the $6 such as Hawaii, Alaska, Guam, Puerto 
Rico, US Virgin Islands) - we need the part number you want and your 
address. You can also pay for your order in advance by money order or 
cashiers check; mail the money order or check (payable to "Magnecor") to 
my attention to the address at the bottom of this e-mail together with 
the part number you need, your address and some way you can be contacted 
- if you send a personal check you should be prepared to wait until the 
check clears our bank.

Prices are subject to change without notice. 6% sales tax is applicable 
for non-tax exempt orders shipped to addresses in Michigan.

SHIPPING CHARGES:

USA: Shipping cost to US ZIP codes is $4.00 for most retail orders 
(including Hawaii, Alaska, APO/FPO addresses, Guam, Puerto Rico, US 
Virgin Islands), we usually use UPS Ground services or Priority Mail. We 
can ship your order express at an extra cost.

Canada: Orders will be shipped via UPS Canada Standard ground service 
(cost will be quoted once we know your postal code but it is usually 
$US10.00 or less for a single set; express services are also available 
on request) - you should be aware that you will have "Entry Preparation 
Charges" applied by UPS, which are UPS charges for Customs clearance. 
THESE CHARGES WILL BE CHARGED TO YOU AT THE TIME OF DELIVERY and can be 
high, so anyone choosing to have goods shipped to Canada should beware. 
Since these fees are applied by UPS at the point of customs, there is no 
way for us to anticipate or pre-pay them, however a list of UPS Customs 
clearance charges to Canada are on the UPS web site at 
http://www.ups.com/canada/using/software/currentrates/engcustoms_rates.html 
- we CANNOT use mail for shipments to Canada.

Other destinations: Shipping costs will vary - we can ship anywhere in 
the world.

Steve Brown - Magnecor (Michigan, USA)
Telephone: 248-669-6688
Fax: 248-669-2994
WWW: http://www.magnecor.com

Mailing Address:
3285 Martin Road 101
Walled Lake  MI  48390
USA




Richard Tanimura wrote:

>Brett,
>
>Are the magnecor a standard item? If so, do you have a PN? If not, how did
>you order them?
>
>snip------
>
>This is not an option for crossflow head (20v, V6, etc) owners- for
>those applications, I heartily recommend the magnecore wires, at
>least based on personal experience.
>
>Brett
>snip --
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.555 / Virus Database: 347 - Release Date: 2003-12-23
>
>_______________________________________________
>quattro mailing list
>quattro at audifans.com
>http://www.audifans.com/mailman/listinfo/quattro
>
>  
>