86 5KTQ AC removal - Wiring issues?

[Kneale Brownson]

In the top of that "big box by the heater" is a temperature sensor.  It's
under a trapezoidal cover screwed to the box.  Take it out and figure out
some way to mount it in the area where it would have been anyway (I made an
L-shaped board I screwed to the firewall to mount it in), and reconnect the
wires to the connections on top of the cover.  The computer needs that
sensor to run the blower motor.  You also should cover up the opening where
the trap door into the cabin was to allow for recirculating air when the
A/C was operating.  


At 04:54 PM 12/30/2003 -0500, Timmmy wrote:
>Hi all
 So I have removed all teh AC gear
>(pump, accumulator etc, including the big box by the heater.
>
>Subsequently I am left with just the heater box, the computer, wires that
>used to go tothe pump are that have nothing to be plugged into, and the
>same for the wires that went to the AC stuff up in the heater well.
>
>The question is, what do I have to do to get the computer to work without
>all the AC gear there?
>