80 timing problems

[InfernoCL]

Why did you do that, just remove the dizzy and line it up again.

-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com] On
Behalf Of Alan Pritchard
Sent: Wednesday, February 05, 2003 2:59 AM
To: Quattro List (E-mail); 'Jay Rabe'; 'j'; 'EBavely'
Subject: re: 80 timing problems

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
Cool, got the car running now.  The problem I had is that the distributor is
frozen in place, so I had to take the t belt off again and turn the
intermediate sprocket until the rotor arm was lined up with the groove in
the dizzy body.  So the car starts and idles beautifully now, but timing is
definitely out as it runs out of steam at around 4000 rpm.
Any btdt on stuck dizzys?
This is engine with the dizzy on the side of the block.....

Best Regards,
Alan Pritchard
Network Administrator



Tel.  01329 289000
Fax. 01329 289001
www.seaeye.com