stripped, rusted, grimey screw removal

[james accordino]

Check out an "impact driver".  You can get them with a
set of drivers (#1,2 and 3 straight and phillips as
well as some others) for under $10.  Try flaps, Home
Depot or Harbor Freight.  These work great on just the
fasteners you mentioned, as well as loctite'd ones
like the driveshaft CVs.

Jim Accordino
ps-I always carry two sizes.  3/8" and 1/2" drive.

--- Ron Wainwright <ron_01056 at yahoo.com> wrote:
>   Listers,
>
>   Those of us owning type 44 turbos know that the
> injector cooling shroud is a prized piece intact at
> a
> scrap yard and for only $5.00 thats even better,
>  but I have a slight problem I can't remove the 2
> screws that attatch it to the fuel injectors, (the 2
> on top were no problem) because they are rusted &
> grimey,
>  so I sprayed them with some lube and hammered a
> phillips in there but I still stripped the screws.
> Is
> there an easy way to get the screws out without
> cracking the plastic holes that the screws go
> through?
> Thanks
> Ron
> 87 5ksq many mods
> 90 200tqa many mods
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> http://mailplus.yahoo.com


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com