2.3 NF block with MC-1 head?

[Mihnea Cotet]

Why would he? The compression ratio is given by the pistons, not the head
AFAIK..

Mihnea

At 15:40 18/02/2003 -0500, duandcc_forums at cox.net wrote:
>I'm pretty sure you'd end up with WAY too high of a compresion ratio to a
>turbo engine...
>
>Dave
>1987 CGT Special Build
>SE Virginia
>
>
> >
> > From: ben swann <benswann at comcast.net>
> > Date: 2003/02/18 Tue PM 01:32:02 EST
> > To: JShadzi at aol.com
> > CC: quattro at audifans.com,  benswann at comcast.net
> > Subject: 2.3 NF block with MC-1 head?
> >
> > Javad, Quattrophile,
> >
> > Just a thought.  I have an NF block and was looking into the
> > possibility of installing my MC-1 turbo head to have a 2.3 MC-1 setup.
> >
> > Can it be done without shaving the head or block? Issues?  Worth it?
> >
> > Ben
> >
> > [From: JShadzi at aol.com
> > was -Re: 80tq: Head Gasket Failure
> >
> > Just a standard one this time around, this motor is temporary but I'm
> > researching using the S6 gasket in the 2.3 motor, thought the bore is
> > bigger.
> >
> > Javad]
> >
> >
> >