2.3 NF block with MC-1 head?

JShadzi at aol.com JShadzi at aol.com
Wed Feb 19 21:14:27 EST 2003


Oh ya, thought I'd mention, I build a 2.3 by putting oversized 82.5mm pistons in an MC block (you remember that GB for pistons, that what they were), that way you end up with a strong bottom end with 8.5:1 pistons, I actually lowered the compression on my set to 8:1 so I can really push the motor.  I've researched machining the NG pistons, they're already pretty thin in the center, don't think I'd risk making them any thinner in a turbo motor, but heck, its worth a shot if you can get the compression down low enough.

Javad



More information about the quattro mailing list