CGT shifter linkage PN search

[DieMarthaDie at aol.com]

tough to tell, it might also be 2d... but my dealer found it with no problem - YBH Porsche/Audi in Edgemont, PA...

I'll see if I can find the part # as I replaced the same thing and they ordered just the cap for under $2.  It was a couple years ago, but I have the file around somewhere...

BTDT - put the cap in the lever arm FIRST not on the ball first.  MUCH easier to fit it over the ball without distortion than vice versa.

John
83 CGT (somewhere under all that snow)
90 V8Q

> I don't know if it is visble in this illustration or not:
>
> http://www.humanspeakers.com/audi/gearshift-pix.htm
>
> but that will at least let you point to exactly what you are looking for
> if it's not actually listed.  I *think* "2c" is the one you want, though.
>
> > If someone that has an ETKA could help me out that would be awesome.
> >
> > I am looking for the little bushing/cap that goes on that lower ball that
> > pushes into the rod coming off the back of the trans for an 83 CGT.  It is
> > what holds the linkage so that you can actually find a gear.  My dealer can't
> > find the PN and told me to use a piece of hose or something and just make it
> > work.  The bushing is shaped kind of like a thimble and
> is about that size.