bypassing autocheck/fooling auto check?

[Dave Aukerman]

Just find and yank the relay and bend/cut-off the correct terminal.  (found
the terminal identity from the SJM site) Re-install the relay and the
problem is forever gone.  The only purpose of the offending terminal is the
light warning system.  If you can't tell you have a light out .......

Dave

----- Original Message -----
From: "scott thomas" <scott at dreamtheater.zzn.com>
To: <audi at humanspeakers.com>; "scott thomas" <scott at dreamtheater.zzn.com>
Cc: <quattro at audifans.com>
Sent: Wednesday, February 26, 2003 3:08 PM
Subject: bypassing autocheck/fooling auto check?


> Huw, is it possible to relay, while retaining the auto check? I'm
> just weary of tearing into the unit. Is it possible to use a resistor
> block in line with the headlight leads (before the relay turn on
> terminals) to simulate a small load?
>
> The Official Dream Theater Site - http://www.dreamtheater.net/
> ___________________________________________________________
> Get your own Web-based E-mail Service at http://www.zzn.com
>