Ford Wheels on a Coupe?

[Alan Pritchard]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
As I recall they should be the correct pitch, but I believe the taper on the
center that fits over the hub is a smaller diameter, and the offsets are
different, I cant remember which way though,
80, 90,100	4 x 108	35...42	57.0

Fiesta, Ka, Puma, Escort, Orion, Focus, Sierra, Mondeo, Granada	4 x 108
35...38	63.3
AHA!!!

-----Original Message-----
From: Dave Hord [mailto:spokes at the-wire.com]
Sent: Tuesday, January 07, 2003 1:03 PM
To: Andrew Suttner
Cc: quattro at audifans.com; Audi 20V
Subject: Re: Ford Wheels on a Coupe?

Any independent tire/wheel shop should be willing to pull your car in and
'try'
a focus wheel on it.

You simply need to take one wheel off and hold up the focus wheel on the
car.

No personal experience though...

-Dave
---------------------------------------------------
89 90q  300km+ Rally Conversion...
Roll cage shots available at:
http://home.the-wire.com/~spokes/rollcage/page1.htm


Quoting Andrew Suttner <Andrews at columbus.rr.com>:

> Ive been looking for a set of wheels and my selection is pretty limited.
> Anyone with BTDT dealing with focus wheels with a 4 x 108 bolt pattern on
> an
> Audi? Is this possible or would they not fit right?
>
> TIA
>
>
> Andy
>
>