Stupid quick question, and a slightly harder one about 5000tq...

[Konstantin Bogach]

Cody,

I vaguely remember reading somewhere that hall sensor code can come up even if the problem
with rpm or cranc position sensor.  Even if it is not true, try to wiggle wires on rpm and
cranc position sensors.  I had same symptom for a week, discovered that wiggling helps and
drove with this another month than replaced sensor with good used one and it fixed the
problem.

Konstantin.

>
>
> Yeah I checked that a few times already. I have my timing belt cover off
> right now because I'm painting it so its nice and easy to check timing and
> turn the motor by the cam gear to set TDC. It was just slightly off (~10
> degress) yesterday so I readjusted it. It almost has to be a wiring problem
> because sometimes after jiggling the wires all arround for a few minutes the
> car will fire for a second or two, but then dies out again. I thought maybe
> the ... forgot what its called, but the circle with the window in it for the
> hall effect was loose like maybe the key broke or somtehing, but after
> checking it is on there nice and good. I noticed my distributor shaft has a
> bit of play, more then I like but still within useable parameters.
>
> -Cody
>