90q Interior Fan

[Richard J Lebens]

It has been about 4 years since the fan (always on) started making
strange insect noises and howling in my 1990 90 20V so I'm going by
long term memory and I'm old.  There should be two screws that when
removed allow you to seperate the black plastic housing from the
motor/impeller.  That gives you enough clearance.  It looks like the
same part.  Was it around $170?


--- BGregory at pmctechnologies.com wrote:
> Got your link to 20v.org.  Still, the directions aren't clear to me;
> looking at the attached .jpeg of the fan motor, the impeller is
> attached
> to the motor shaft with a locking washer.  If I was successful at
> separating the impeller from the motor shaft, wouldn't the locking
> washer
> fall into the housing and how would I replace the washer when
> reinstalling?  Am I missing something?
>
>
>

> ATTACHMENT part 2 image/jpeg name=90q_interior_fan.JPG



__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com