B4 90 Int. Air Temp Sensor Removal...

JShadzi at aol.com JShadzi at aol.com
Sun Jul 6 01:14:34 EDT 2003


--
[ Picked text/plain from multipart/alternative ]
Ok, thanks, so the FA shows that its two pieces, and upper part (the grill)
and a lower part, the actual sensor must be the lower part.  The hose just goes
to a small fan motor that pulls air through the sensor.

Thanks,
Javad

In a message dated 7/4/2003 6:59:17 PM Pacific Standard Time,
feb at febsun.cmhnet.org writes:

> I haven't dealt with a 90, but on the 5000/100/A6 the temp sensor
> has to removed from the inside of the instrument panel.
>
> The grill that you can see on top is in fact the top end of
> a couple shafts that pass down through the actual case of the
> temp sensor, and at the bottom of those shafts there are some
> screws or other fittings that hold the case up against the underside
> of the dashboard.
>
> It's difficult to describe in words, but in summary you can't get
> it out from the outside.  You've got to attack from the inside.
>
> Franco




More information about the quattro mailing list