[Fwd: Re: Injector fan working or not? 87 5kcstq]

[John Sherrow]

The sensor is a single pin type at the rear of the intake manifold by
the ISV. Remove the connector and touch it to the manifold. The fan
should start.

-------- Original Message --------
From: "Cade Carvell" <ccarvell at nbsusa.com>
Subject: Re: Injector fan working or not? 87 5kcstq
To: <Mikea2769 at aol.com>, <quattro at audifans.com>

Mike,
  SImply hotwire the fan to the battery, it should kick it.  It is like
the 4000, then you can go to the sensor under the rad, and jump that
wire to, should cause it to kick.  Alternatively, you can jump the relay
in the fuse box too.  I am assuming that the 5000 is similiar to the
4000 setup, if not, ignore what I post here.



Cade Carvell
National Business Systems, Inc.
2919 West Service Road
Eagan, MN 55121
Office: 651-994-4400


This message (including any attachments) contains confidential
information intended for a specific individual and purpose,
and is protected by law.  If you are not the intended recipient,
you should delete this message and are hereby notified that any
disclosure,copying, or distribution of this message, or the taking
of any action based on it, is strictly prohibited.