new engine is here/damn competition motors

[luke]

actually that wasnt quite it...
well let me tell you what info i want...
im interested in knowing how the mc will preform with a mac07a as opposed to
a mac11a/b
i just need a good comparison... ie. fuel cutoff, fuel curve etc.
im pretty sure i saw a site with it... cant find it now though...
maybe it was just mac11 and mac14 but i still cant find even that...

thanks
luke
90tq


> The 034 EFI site has timing map comparisons, I think that's what you're
> refering to?
> They're in the ignition suppliment PDF file
> Mike
>
> > i once saw a site that had the fuel map comparisons at different rpms
> > between ecus...
> > doesnt look like its sjmauto...
> > know the site?
> >
> > luke
> >
> > ----- Original Message -----
> > From: "Michael Gough" <mdg3369 at newtsplace.com>
> > To: "luke" <maytagasm at sympatico.ca>
> > Sent: Saturday, July 19, 2003 2:08 PM
> > Subject: Re: new engine is here/damn competition motors
> >
> >
> >> So how come you took it home?
> >> Should'a told them to fuck off....
> >> Anyhow, the MAC07 will work fine, with the MAC07 wiring harness,
> > distributor
> >> and fuel system, which I assume is all you have since you just got a
block
> >> and head...
> >> The MC won't knock with the MAC07, or with the MAC11, those guys a
bunch
> > of
> >> you know what if that's what they told you. The KH might knock with the
> >> MAC11, and the MC2 might knock with the MAC11 since the MAC11 has a
bigger
> >> advance curve because of the low compression ratio of the MC1.
> >> Your dizzy will work just fine with it, until you go DIS anyway ;)
> >> Mike
> >>
> >> > This is a multi-part message in MIME format.
> >> > --
> >> > [ Picked text/plain from multipart/alternative ]
> >> > well the mc2 that competition motors had for me was really an mc1.
> >> > before selling it to me they removed both manifolds, turbo,
injectors,
> > temp
> >> > sensor, cold start,
> >> > hydraulic assist, OIL FILTER HOUSING!!!!, turbo lines, DISTRIBUTER,
and
> >> > probably a few things im forgetting.
> >> > i basically got a block, head and luckily knock sensor for what i was
> >> > expecting to pay for
> >> > THE WHOLE ENGINE.
> >> > i hope to hell my KH distributer works.
> >> > can anyone verify that? they were clueless.
> >> > they also told me just to use my mac07a and said if i plug the mac11a
in
> > it
> >> > would ping.
> >> > duh... dont you think that if you plug the original engines computer
in
> > to
> >> > the original engine with a new wiring harness
> >> > and it pings that the problem is the wiring harness?
> >> > im pretty pissed off...
> >> > im going to go rip the mac11a out of the car myself.
> >> > but... if you live in belleville ontario or close and need work done
on
> >> > your vw, audi, porsche they
> >> > are still probably best...
> >> > that is sooooooo sad.
> >> > i will only buy parts from them from now on.
> >> > my dad bought an a6 from them a while back and hes even more pissed
than
> > i
> >> > am about my engine.
> >> > snakey f****s.
> >> > they arent dishonest... just snakey.
> >> >
> >> > can someone please verify that my distributer will work?
> >> > or that my oil filter housing will work?
> >> > or will a mac07a even run the thing?
> >> >
> >> > thanks
> >> > luke
> >> > 90tq
> >> > --
> >>
>