Audi Trailer wiring

[George Harris]

I used the 6 pole because it seemed like it is designed for the type of
system used in the Audi, with separate brake, turn and running light
circuits.

if the converter box is the only solution, it would be simpler to do
that and go back to the 4 pin setup, but I did install a separate light
for the  brake lights :-)

Cheers
George

AudiBiTurbo at aol.com wrote:
> Use a wiring converter box, they're about 30 and is basically a relay
> pack.  That way the Audi doesn't "sense" they you have the incorrect
> resistance or voltage drop.
>
> Also, why a 6 pin versus a standard 4 pin setup?  With a 4 pin, you can
> hook up to anything directly or with an inexpensive converter.
>
> Mark Rosenkrantz
> AudiBiTurbo at aol.com