still no spark

[JShadzi at aol.com]

All Audi 10v flywheels have the same TDC, just make sure the mark says 0 and that the #1 piston is all the way up.

Javad

>flywheel is either 90 or 180 degrees off... its the 90 flywheel... i dont
>think it matches up...
>
>luke
>90tq
>
>
>> And as long as your crank is at TDC you're good, check it with the
>flywheel.
>>
>> Javad
>>
>> >i spun it until one was on a compression stroke (blew out) then checked
>with
>> >the cam gear
>> >reference and it was inline... thne i lined the dist up...
>> >
>> >luke
>> >90tq
>> >
>> >> That doesn't mean you're at TDC, Are the cyl #1 intake and exh valves
>both
>> >closed? Both Cam lobes should be pointing up away from the lifter.
>> >>
>> >> Javad
>> >>
>> >> >the wires are on the back and the line is on the front like the manual
>> >> >shows...
>> >> >wish it was that...
>> >> >
>> >> >luke
>> >> >90tq
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>