Going to be moving battery box to the truck.. what gauge wire?

[JShadzi at aol.com]

I'd also add that a lot of the spot welds can be cut through witha cold chisel which leaves a better finish than a cut off piece of the box, there are a few spots that you'll need to cut with the wheel, then you can cut through the spot welds and the whole thing comes out surprisingly cleanly.

Javad

>
>> What the best tool to cut the battery box in the engine bay out
>> with??? --
>
>A die grinder (electric or pneumatic) with a cut off wheel on it should
>work well.  just watch out for "unintended" cuts, and things on the
>other side of the battery tray.
>
>--
>Huw Powell
>
>http://www.humanspeakers.com/audi
>
>http://www.humanthoughts.org/
>
>