NG vs 20V

[Alan Pritchard]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
That is my scheme exactly!!!! Only thing is my compression ratio !!!!! is
intercooling necessary on that set up? I am just to be safe...

Best Regards,
Alan Pritchard
Network Administrator

Seaeye Marine Ltd.

Tel.  01329 289000
Fax. 01329 289001
www.seaeye.com

-----Original Message-----
From: JShadzi at aol.com [mailto:JShadzi at aol.com]
Sent: Monday, March 03, 2003 6:24 AM
To: edshred2000 at yahoo.com; shoemakersp at comcast.net; quattro at audifans.com
Subject: Re: NG vs 20V

--
[ Picked text/plain from multipart/alternative ]
You can go to 10psi if you like, you can get about 200hp out of the stock
CIS
with this kind of setup.  You don't "need" the 5kt intake, the stock KX will
work fine too, you  just need to come up with some intake plumbing.

Javad

In a message dated 3/2/2003 10:20:46 PM Pacific Standard Time,
edshred2000 at yahoo.com writes:

> Bolt on the turbo and exhaust manifold from an early
> Audi turbo diesel. Also necessary will be a 5000 turbo
> intake manifold. Strictly bolt on. should take a day
> or two (or three) once all the parts are assembled
> (and I've got them all!). Engine will remain in place,
> although such a set up will need a stronger clutch at
> some point
>
> Should be good for 160 hp at a safe 5 psi boost