Urq Hi/Lo beam switch R&R?

[Ti Kan]

Felix Tang writes:
> Has anyone repaired or replaced the high/lo beam switch on the Urq steering
> column?  Bentley indicates that the switch is part of the wiper switch
> assembly, which is actuated by the turn signal lever assembly.  Is the
> Hi/Lo switch an integral part (non-removeable) of the wiper assembly?

On the type 81/85, it's a part of the wiper/washer stalk switch.  It is
easily replaceable.  Just remove steering wheel (center the wheel, pull
off horn pad and remove the big 24mm nut), and you'll find some screws
that secures the switch to the column.

> Oh, and how do I remove the rotary headlight switch on the upper left of
> the instrument panel?

If I recall, simply remove the front bezel of the instrument cluster pod
and the switch is held in there via plastic tabs.  Carefully pry out
and disconnect the wiring plug.

-Ti
2003 A4 1.8T multitronic
2001 S4 biturbo 6-sp
1984 5000S turbo
1980 4000 2.0 5-sp
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///