4kq performance parts

[Eddy Mattice]

In my 4ktq, I run h+r's with bilstein sports, after installing the susp, I
added frt strut brace ala 90cq(i think that is where it is from) bought from
dealer at a cost of about $100 can for the two plates and the bar. The bar
could be easily fabricated but for $30 why bother. Does seem to help stiffen
up the frt a bit. I also added a rear bar used coupe frt bar, frt control
arms, stock links bushings and hardware. Welded piece of bar stock cut a
slot in in and the factory brackets and bushings work perfect. I rec going
with a 4000q frt bar in the back though (have to get around to that still).
The coupe bar in the back helps alot but still plows somewhat, 4kq bar would
be better but don't think you ever be free of the plow effect... My .02
can...

Eddy

1x86 4ktq
1x86 4kq
1x87 4kq
1x84 vw camper
1x93 s4 (pa's car)
1x02 vw passat 4mot wag (ma's car)
and a lousy honda too...






>From: george nimmer <george164 at earthlink.net>
>To: quattro at audifans.com
>Subject: 4kq performance parts
>Date: Tue, 25 Mar 2003 21:50:08 -0500 (GMT)
>
>I'm looking for a US distributor for the Sparco Aluminum Strut Tower Brace
>for Audi 4000 quattro.  I can't find anyone who is selling this any more.
>Any clues where to find one?
>
>Also, I need a larger rear sway bar.  Even with the center diff locked, I'm
>getting some understeer (although not nearly as bad as when the center diff
>is UNlocked).  Blau and 2Bennet sell a modified 22mm unit, but I'm looking
>for something more like 25mm.  Any leads on this?
>
>I'm running my 4kq in SCCA Solo II (SP class), and need to add a few
>go-fast parts before the next event.  ;-)
>
>TIA
>George
>


_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail