CGT with 4Kq sway bar

[Ti Kan]

edkellock at juno.com writes:
> I was going to say about the same thing, but you said it better Ti.
>
> I have essentially the same setup as you do Dave, except I have an Addco
> rear bar.  I bought it many years ago and with the stock front bar, the
> car seemed to push more and had a very uneven step from understeer to
> oversteer.  After I did the 4kq front bar, it took me a couple months to
> remember I had the rear bar.  That went back on and the car is way fun.
> I can still get it to push, but I have to pitch it pretty inelegantly to
> do so.

Yeah, I do something similar on my 4000 as well.  I have an UrQ 23mm front
bar and a Suspension Techniques 25mm rear bar.  In conjunction with
Eibach sport springs and Konis it's an excellent handler.  This is
especially so since I have a 4-cylinder car with less weight hanging
over the front axle.

-Ti
2003 A4 1.8T multitronic
2001 S4 biturbo 6-sp
1984 5000S turbo
1980 4000 2.0 5-sp
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///