Stripped CV Bolts

Eric Pipas ericpipas at charter.net
Mon May 12 22:42:26 EDT 2003


I highly reccoment the penetrant called parts breaker (PB. It is sold in a
can that looks like a Cartoon. Amazing stuff !!!



-----Original Message-----
From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
Behalf Of Huw Powell
Sent: Monday, May 12, 2003 7:27 PM
To: Mholme3 at aol.com
Cc: quattro at audifans.com
Subject: Re: Stripped CV Bolts




Mholme3 at aol.com wrote:
> Does anyone have a proven method of removing badly seized, badly
> stripped CV bolts from an axle?  I have two rear bolts that seem to
> be fused to the little coupler piece. Been hitting them with liquid
> wrench for a few days now and still nothing.  I used vice grips and
> leverage from the sub frame, along with the tire lug wrench to close
> them with lots of pressure.  They will not budge.  I need to get this
> axle replaced ASAP so if anyone has thoughts, I would appreciate it.

On something in the last couple of years I had to do this.  I cut the
heads off the un-undoable bolts with a die grinder and cutting wheel.
After all that stress, the remains of the bolts turned out easily - I
figure a combination of the vibration working them loose, and no
pressure on them anymore helped.

--
Huw Powell

http://www.humanspeakers.com/audi

http://www.humanthoughts.org/




More information about the quattro mailing list