Ignition Switch

[Greg Galinsky]

--
--
[ Picked text/plain from multipart/alternative ]
I've found that if the instrument cluster is removed that gives you access
to the 2 small screws( that have their heads painted over and like sealed).
once you pick off the paint, the screws and the switch can easily be removed
  Total of less than 1 hour
Greg Galinsky

-------Original Message-------

From: JShadzi at aol.com
Date: Monday, May 26, 2003 08:41:45 PM
To: mikebegin at adelphia.net; quattro at audifans.com
Subject: Re: Ignition Switch

--
[ Picked text/plain from multipart/alternative ]
Nope, no way to do it IME, just pull the steering column, not too bad, once
its out you can easily chage the switch. Problem is the switch is held in by
2
very small screws that thread in from the top, no easy acess to them.

If anyone's found another way that woudl be nice, takes a couple hours to do
it the above way though.

Javad

In a message dated 5/26/2003 3:59:41 PM Pacific Standard Time,
mikebegin at adelphia.net writes:

> Anyone know how to change the ignition switch in a 1990 80 Quattro without
> taking out the whole dash / steering column?
>

.
--
[ IMSTP.gif of type image/gif deleted ]
--