regarding lack of power...slight update pt. 2

[Michael S. Williams]

At 12:34 AM -0400 5/28/03, JShadzi at aol.com wrote:
>Mike, you really should set the CO, the plug is removeable, just
>drill a small hole into it, like 1/16", but not all the way through,
>and then thread a sheet metal screw into it, and pull it out with
>some pliers.  From there you should be able to check the CO and get
>it set per the Benltly, or at least check to see if its in range.
>Also, have you tried running any codes off the ECU?
>

ok, i'll drill it tomorrow...

dont have a multimeter though... would a bad adjustment on the CO
cause the problems im experiencing?

yeah, ive run input and output codes... no problems on either one...
so, according to the computer,everything is kosher...
--
MswmSwmsW

     <<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>
The solution is obvious.  We all have to become dumber. -Jon Rappoport

So crucify the ego, before it's far too late
To leave behind this place so negative and blind and cynical,
And you will come to find that we are all one mind
Capable of all that's imagined and all conceivable. - TooL, Reflection
      <<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>=<<<->>>