Dummy Fog Lamp Inserts Update (3)

[Casting Fool]

[Posted this last night about 9:59 EST, but didn't see it post.  Tried again
today at 11:26 AM EST, but no post.  I'll try again, then hold off for a day
or so...]

We just installed a set of test dummy fog lamp inserts on Travis' 4K.  The
test was mostly for fit (and for wearability over time), but surprisingly
the matte black-painted inserts looked good, too.  For this test we didn't
need actual clear lenses, so the clear front lens was replaced with an
opaque one that had been painted matte black and clear-coated with a matte
clear coat finish.

The inserts fit perfectly, and the black finish blended well into the 4K's
front image.

Travis is going to take some pictures that I'll post at my website sometime
in the next week (when he's got the time to take them).  It will help if it
is kept in mind that these are test inserts and hence, are not the same as
the production version.  The production version will be smooth on the front
and will not have the manufacturer's logo or other markings.

More later...

TTFN - Mike Jackson
Casting Fool & Son
Augusta, GA  USA
http://www.cfnson.com