No subject

an adjustable pulley.
Wonder if anyone run that on a 5ktq.

Zsolt

----- Original Message -----
From: Huw Powell <audi at mediaone.net>
To: Gary Erickson <erickson at teleport.com>
Cc: Kaklikian, Gary <Gary.Kaklikian at compaq.com>; <GMBCHEF at aol.com>;
<quattro at audifans.com>
Sent: Wednesday, February 28, 2001 7:47 PM
Subject: Re: timing belt change - advance/or not


>
> > IIRC, each tooth on the cam gear is 8 degrees.  Too much to move at one
> > IMO -- I agree on the 4 degrees thought.
>
> I just counted one (from an NG, wrong motor I suppose) and it had about
> 52 teeth (+/-1...) which would be 6.9 degrees/tooth.
>
> of course if the teeth don't line up "perfectly" that change how many
> degrees from exactly TDC the first tooth in each direction sets it.
>
> --
> Huw Powell
>
> http://www.humanspeakers.com/audi/
>
> http://www.humanthoughts.org/