4k wheel studs

[JShadzi at aol.com]

Not sure if this helps you specifically, but HR has a variety of studs available off the shelf that work perfectly.

Javad

>A while ago I changed my Rabbit GTI over to studs from bolts.  I just
>got fully threaded M12xcan't remember and threaded them in from the back
>side with a bit of red loctite.  I used Civic lug nuts as they are
>shaped the same as the VW bolts and have a high quality crome finish to
>keep from rusting.
>
>Since my 4k uses M14 bolts my current lug nut solution will of course
>not work.  Does anyone have any ideas on a lug nut that is shapped
>correctly, but M14 that I could use to convert the 4k?  I imagine some
>newer Audi has something that would work, but I don't know anything
>about newer Audis.
>
>Unlike the Rabbit it looks like I can do the conversion (at least on the
>front) without having to pull the hubs.
>
>TIA
>
>--
>Eric Sanborn
>'85 4ktq
>
>
>http://www.mindspring.com/~robinsanborn/4000/
>
>
>