Need some tech advice.

[Bob Rossato]

Steering wheel removal is not needed.  Here are some instructions from the
UrS4 site which will also apply to your '93 100.  I recommend you lay a
small towel on top of the steering column before pulling out the instrument
cluster so that you don't scratch the plastic on the steering column.

http://www.urs4.com/technical/interior/interior_trim.html#IC%20removal

The larger connectors will have a locking slide/tab in the center that needs
to be pulled up before you pull the whole connector out of the IC.

Bob

> -----Original Message-----
> From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
> Behalf Of Edward Birch
> Sent: Saturday, October 04, 2003 3:26 PM
> To: quattro at audifans.com
> Subject: Need some tech advice.
>
>
>
> Greetings all......
>
> I need to remove 'n repair the instrument cluster on a 1993 Audi 100S,
> FWD--if that matters.
>
> Is this procedure very difficult without removing the steering wheel?
>
> Some solder joints will be addressed once I remove the cluster.
>
> Thanks,
>
> Ed Birch, Pennsylvania.
> (93-100S)
>
>