fuel pump swap

[Denis]

I have 3 fuel pump. 5000TQ 1987, 100Q 1989, and 5000T 1985.
All tree part number are the same(0 580 254 030)   , and i tried to swap all
of accumulator between them and it works good. I put the 100Q acc on my 90
Audi ,, runs well. I tried the 100Q unit on the 5000TQ runs good. I swaped
the fuel pump between the 5000T and the 5000TQ, runs good. I now swap the
100Q to my 100Q.
Long story besidee those swap ;-)

Denis

Fitting was identical, if i heve good memory, but fitting were unsuable,
full of rust. I must buy a neww one for the 100Q turbo swap, the old one is
so rusty i dont want to be towing....

----- Original Message -----
From: Ti Kan <ti at amb.org>
To: <Mike_Buckham at ptk.pioneer.co.uk>
Cc: <quattro at audifans.com>
Sent: Friday, October 10, 2003 5:17 AM
Subject: Re: fuel pump swap


> Mike_Buckham at ptk.pioneer.co.uk writes:
> > I have an '86 100qa (non-turbo) parts car and am hoping to take out the
> > fuel pump and perhaps the pressure accumulator too and swap them into my
> > '89 200qta. Does anyone know if the parts are compatible or are the
> > pressures and/or fixings too different?
>
> For the US these parts are the same between the models stated,
> and I'd expect your Euro cars to be too.
>
> -Ti
> 2003 A4 1.8T multitronic
> 2001 S4 biturbo 6-sp
> 1984 5000S turbo
> 1980 4000 2.0 5-sp
> --
>     ///  Ti Kan                Vorsprung durch Technik
>    ///   AMB Laboratories, Sunnyvale, CA. USA
>   ///    ti at amb.org
>  //////  http://www.amb.org/ti/
> ///
>
>